Installation Guide

Setting up your Orochi Cobra Bag is quick and simple. Follow these steps to get your training station ready in no time.

What’s Included in the Box

  • 2 × Sandbags for the base

  • 1 × Bottom metal pole

  • 1 × Orochi punching ball

  • 1 × Locking screw

Tools You'll Need

  • ~80 kg of sand (recommended for max stability)

  • A pump for the punching ball

  • A stable, flat surface

Step-by-Step Installation

  1. Prepare the Base
    Fill both sandbags with ~40 kg each (80 kg total). Place them on a flat surface and lock them together. Place the first bag on the base. Position the second bag on top and clip it firmly to lock the bags.

  2. Attach the Upright Post
    Insert the bottom pole into the base. Then connect the top pole on top of it.

  3. Mount the Punching Ball
    Slide the Orochi ball (half-inflated) over the top cup. Tighten the laces firmly around the cup to lock it in place.

  4. Inflate the Ball
    Use the pump to inflate the ball. Do not overinflate, it should feel firm but flexible.

  5. Adjust the Height & Lock
    Set the ball so it sits just below your chin level. Insert the locking screw and tighten securely.

  6. Final check

    Move the bag slightly to ensure everything is stable and secure. Add extra sand if needed.

Done. You’re Ready. Your Orochi Cobra Bag is now set for battle.